.: Tractor Connection Limited ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

Automotive Chains

Walking Tractor Chains

DIN ISO Chain No.	Pitch	Roller diameter	Width between inner plates	Pin diameter	Pin length		Inner plate depth	Transverse pitch	Ultimate tensile strength	Average tensile strength	Weight per meter
	P	d1 max	b1 min	d2 max	L max	Lc max	h2 max	Pt	Q min	Q0	q
	mm	mm	mm	mm	mm	mm	mm	mm	KN	KN	kg/m
08B-2	12.7	8.51	7.75	4.45	31.2	32.2	11.8	13.92	32.0	3.76	1.34
12A-2	19.05	12.57	12.57	5.94	48.8	50.5	18.0	22.78	63.6	83.3	2.92
12AH-2	19.05	12.57	12.57	5.94	55.3	57.1	18.0	26.11	63.6	84.3	3.71

Short Pitch Conveyor Roller Chain Attachments

DIN ISO Chain NO.	ANSI Chain No.	P	G	F	W	T	h4	d4
		mm	mm	mm	mm	mm	mm	mm
08A	40	12.7	9.5	25.4	35.2	1.5	7.9	3.4
10A	50	15.875	12.7	31.75	46.2	2.03	10.3	5.5
12A	60	19.05	15.9	38.1	55.6	2.42	11.9	5.5
16A	80	25.4	19.1	50.8	64.8	3.25	15.9	6.8
20A	100	31.75	25.4	63.5	87.3	4.0	19.8	9.2
24A	120	38.1	28.6	76.2	108.5	4.8	23.0	11.0
28A	140	44.45	34.9	88.9	123	5.6	28.6	11.4
32A	160	50.8	38.1	101.6	142.8	6.4	31.8	13.1
*06B	¡¡	9.525	8.0	19.04	27	1.3	6.5	3.5
08B	¡¡	12.7	9.5	25.4	36.4	1.6	8.9	4.5
10B	¡¡	15.875	14.3	31.76	44.6	1.7	10.31	5.3
12B	¡¡	19.05	16.0	38.1	52.4	1.85	13.46	6.4
16B	¡¡	25.4	19.1	50.8	72.6	3.1	15.88	6.4

DIN ISO Chain NO.	ANSI Chain No.	P	G	C	F	T	d4
		mm	mm	mm	mm	mm	mm
08A	40	12.7	9.5	12.7	19.05	1.5	3.4
10A	50	15.875	12.7	15.9	25.25	2.03	5.5
12A	60	19.05	15.9	18.3	29.33	2.42	5.5
16A	80	25.4	19.1	24.6	34.7	3.25	6.8
20A	100	31.75	25.4	31.8	43.3	4.0	9.2
24A	120	38.1	28.6	36.5	51.6	4.8	11.0
28A	140	44.45	34.9	44.5	62.0	5.6	11.4
32A	160	50.8	38.1	50.8	69.85	6.4	13.1
*06B	¡¡	9.525	8.0	9.52	13.5	1.3	3.5
08B	¡¡	12.7	9.5	13.35	18.9	1.6	4.5
10B	¡¡	15.875	14.3	16.5	22.95	1.7	5.3
12B	¡¡	19.05	16.0	21.45	28.6	1.85	6.4
16B	¡¡	25.4	19.1	23.15	34	3.1	6.4

DIN ISO Chain NO.	P	G	F	W	T	h4	d4
	mm	mm	mm	mm	mm	mm	mm
08B	12.7	23.3	25.4	36.4	1.6	8.9	4.3
10B	15.875	29.58	31.76	44.6	1.7	10.31	5.3
12B	19.05	34.05	38.1	52.4	1.85	11.4	6.4
16B	25.4	46.4	50.8	72.6	3.1	15.88	6.4

DIN ISO Chain NO.	P	G	C	F	T	d4
	mm	mm	mm	mm	mm	mm
08B	12.7	23.3	13.35	18.9	1.6	4.3
10B	15.875	29.58	16.5	22.95	1.7	5.3
12B	19.05	34.05	21.45	28.6	1.85	6.4
16B	25.4	46.4	23.15	34	3.1	6.4

DIN ISO Chain NO.	ANSI Chain No.	P	G	L	F	W	T	d4	d4
		mm	mm	mm	mm	mm	mm	mm	mm
08A	40	12.7	23.1	9.5	25.4	35.6	1.5	8.0	4.5
10A	50	15.875	28.88	11.9	31.8	46.8	2.03	10.3	5.5
12A	60	19.05	34.65	14.3	38.1	56.4	2.42	11.9	6.6
16A	80	25.4	45.9	19.1	50.8	73.2	3.25	15.9	9.0
20A	100	31.75	57.65	23.8	63.5	89.8	4.0	19.8	11.0

DIN ISO Chain NO.	ANSI Chain No.	P	G	L	C	F	T	d4
		mm	mm	mm	mm	mm	mm	mm
08A	40	12.7	23.1	9.5	12.7	17.4	1.5	4.5
10A	50	15.875	28.88	11.9	15.9	23.05	2.03	5.5
12A	60	19.05	34.65	14.3	18.3	26.86	2.42	6.6
16A	80	25.4	45.9	19.1	24.6	35.45	3.25	9.0
20A	100	31.75	57.65	23.8	31.8	44.0	4.0	11.0

Double Pitch Transmission Roller Chains

DIN ISO Chain NO.	ANSI Chain No.	Pitch	Roller diameter	Width between inner plates	Pin diameter	Pin length		Inner plate depth	Ultimate tensile strength	Average tensile strength	Weight per meter
		P	d1 max	b1 min	d2 max	L max	Lc max	h2 max	Q min	Q0	q
		mm	mm	mm	mm	mm	mm	mm	KN	KN	kg/m
208A	2040	25.4	7.95	7.85	3.96	16.6	18.8	12.0	14.1	16.3	0.42
208B	¡¡	25.4	8.51	7.75	4.45	16.7	18.2	11.8	18.0	19.5	0.45
210A	2050	31.75	10.16	9.40	5.08	20.7	23.3	15.0	22.0	26.0	0.73
210B	¡¡	31.75	10.16	9.65	5.08	19.5	20.9	14.7	22.4	26.5	0.65
212A	2060	38.1	11.90	12.57	5.94	25.9	28.3	18.0	31.8	33.6	1.02
212B	¡¡	38.1	12.07	11.68	5.72	22.5	25.2	16.0	29.0	32.2	0.76
216A	2080	50.8	15.88	15.75	7.92	32.7	36.5	24.0	56.7	65.0	1.70
216AH	¡¡	50.8	15.88	15.75	7.92	36.2	39.4	24.0	56.7	68.8	2.17
216B	¡¡	50.8	15.88	17.02	8.28	36.1	39.1	21.0	60.0	70.8	1.75
220A	2100	63.5	19.05	18.90	9.53	40.4	44.7	30.0	88.5	101.8	2.55
220B	¡¡	63.5	19.05	19.56	10.19	41.3	45.0	26.4	95.0	101.5	2.62
224A	2120	76.2	22.23	25.22	11.1	50.3	54.3	35.7	127.0	147.1	4.06
224B	¡¡	76.2	25.4	25.4	14.63	53.4	57.8	33.2	160.0	174.0	4.70
228B	¡¡	88.9	27.94	30.99	15.90	65.1	69.5	36.7	200.0	214.4	6.23
232B	¡¡	101.6	29.21	30.99	17.81	66.0	71.0	42.0	250.0	267.5	6.72

Double Pitch Conveyor Roller Chains

DIN ISO Chain NO.	ANSI Chain No.	Pitch	Roller diameter	Width between inner plates	Pin diameter	Pin length		Inner plate depth	Ultimate tensile strength	Average tensile strength	Weight per meter
		P	d1 max	b1 min	d2 max	L max	Lc max	h2 max	Q min	Q0	q
		mm	mm	mm	mm	mm	mm	mm	KN	KN	kg/m
C208A C208AL	C2040 C2042	25.4	7.95 15.88	7.85	3.96	16.6	18.8	12.0	14.1	16.1	0.50 0.84
C208B C208AL		25.4	8.51 15.88	7.75	4.45	16.7	18.2	11.8	18.0	19.5	0.55 0.89
C210A C210AL	C2050 C2052	31.75	10.16 19.05	9.40	5.08	20.90	23.3	15.0	22.2	26.7	0.78 1.27
C212A C212AL	C2060 C2062	38.1	11.91 22.23	12.57	5.94	25.9	28.3	18.0	31.8	35.5	1.12 1.61
C212AH C212AHL	C2060H C2062H	38.1	11.91 22.23	12.57	5.94	29.2	31.6	18.0	31.8	39.2	1.44 2.07
C216A C216AL	C2080 C2082	50.8	15.88 28.58	15.75	7.92	32.80	36.5	23.80	56.7	66.1	2.08 3.12
C216AH C216AHL	C2080H C2082H	50.8	15.88 28.58	15.75	7.92	36.2	39.4	24.80	56.7	68.8	2.54 3.58
C220A C220AL	C2100 C2102	63.5	19.05 39.67	18.90	9.53	40.0	44.7	30.0	88.5	103.8	3.01 4.83
C220AH C220AHL	C2100H C2102H	63.5	19.05 39.67	18.90	9.53	43.6	46.9	30.0	88.5	106.8	3.56 5.38
C224A C224AL	C2120 C2122	76.2	22.23 44.45	25.22	11.1	50.45	54.3	36.1	127.0	147.0	4.66 7.66
C224AH C224AHL	C2120H C2122H	76.2	22.23 44.45	25.22	11.1	53.5	57.5	36.1	127.0	151.4	5.26 8.26
C232A C232AL	C2160 C2162	101.6	28.58 57.15	31.75	14.27	64.50	69.6	48.0	226.8	260.2	8.23 11.95
C232AH C232AHL	C2160H C2162H	101.6	28.58 57.15	31.75	14.27	68.2	73.0	48.0	226.8	266.9	9.06 12.77

Double Pitch Conveyor Roller Chain Attachments

DIN ISO Chain NO.	ANSI Chain No.	P	G	L	F	W	h4	d4
		mm	mm	mm	mm	mm	mm	mm
C208A C208AL	C2040 C2042	25.4	19.1	9.5	25.4	39.6	9.1	3.4
C208B C208AL	¡¡	25.4	23.2	12.7	25.4	39.6	9.1	4.5
C210A C210AL	C2050 C2052	31.75	23.8	11.9	31.8	49.0	11.1	5.5
C212A C212AL	C2060 C2062	38.1	28.6	14.3	42.9	67.8	14.7	5.5
C212AH C212AHL	C2060H C2062H	38.1	28.6	14.3	42.9	67.8	14.7	5.5
C216A C216AL	C2080 C2082	50.8	38.1	19.1	55.6	87.8	19.1	6.8
C216AH C216AHL	C2080H C2082H	50.8	38.1	19.1	55.6	87.8	19.1	6.8
C220A C220AL	C2100 C2102	63.5	47.6	23.8	66.6	107.5	23.4	8.4
C220AH C220AHL	C2100H C2102H	63.5	47.6	23.8	66.6	107.5	23.4	8.4
C224A C224AL	C2120 C2122	76.2	57.2	28.6	79.3	127.5	27.8	10.5
C224AH C224AHL	C2120H C2122H	76.2	57.2	28.6	79.3	127.5	27.8	10.5
C232A C232AL	C2160 C2162	101.6	76.2	38.1	104.7	147.5	36.5	13.1
C232AH C232AHL	C2160H C2162H	101.6	76.2	38.1	104.7	147.5	36.5	13.1

DIN ISO Chain NO.	ANSI Chain No.	P	G	L	C1	C2	F	d4	d4
		mm	mm	mm	mm	mm	mm	mm	mm
C208A C208AL	C2040 C2042	25.4	19.1	9.5	25.4	39.6	9.1	3.4	¡¡
C208B C208AL	¡¡	25.4	23.2	12.7	25.4	39.6	9.1	4.5	¡¡
C210A C210AL	C2050 C2052	31.75	23.8	11.9	31.8	49.0	11.1	5.5	¡¡
C212A C212AL	C2060 C2062	38.1	28.6	14.3	42.9	67.8	14.7	5.5	¡¡
C212AH C212AHL	C2060H C2062H	38.1	28.6	14.3	42.9	67.8	14.7	5.5	¡¡
C216A C216AL	C2080 C2082	50.8	38.1	19.1	55.6	87.8	19.1	6.8	¡¡
C216AH C216AHL	C2080H C2082H	50.8	38.1	19.1	55.6	87.8	19.1	6.8	¡¡
C220A C220AL	C2100 C2102	63.5	47.6	23.8	66.6	107.5	23.4	8.4	¡¡
C220AH C220AHL	C2100H C2102H	63.5	47.6	23.8	66.6	107.5	23.4	8.4	¡¡

Hollow Pin Chains

Xilin Chain No.	Pitch	Roller diameter	Width between inner plates	Pin diameter		Pin length		Inner plate depth	Ultimate tensile strength	Average tensile strength	Weight per meter	Type form
	P	d1 max	b1 min	d2 max	d3 max	L max	Lc max	h2 max	Q min	Q0	q	¡¡
	mm	mm	mm	mm	mm	mm	mm	mm	KN	KN	kg/m	¡¡
10BHB	15.875	10.16	9.65	5.94	4.04	19.3	20.6	14.7	17.0	28.2	0.84	A
12BHB	19.05	12.07	11.68	6.50	4.00	21.6	22.8	15.9	23.6	26.2	1.06	A
60HB	19.05	11.91	12.70	7.00	5.01	25.5	26.6	18.0	20.0	22.4	1.37	A
HB35	35.0	20.00	16.00	13.35	10.20	30.4	31.6	26.3	23.52	26.5	2.02	B
*40HB	12.7	7.95	7.85	5.63	4.00	16.5	17.6	12.0	11.0	12.1	0.55	B
*50HB	15.875	10.16	9.40	7.03	5.13	20.7	21.9	15.09	20.0	22.1	0.89	B
*60HB	19.05	11.91	12.70	8.31	6.00	25.8	26.4	18.0	24.0	26.7	1.28	B
*80HB	25.4	15.88	15.75	11.10	8.03	32.7	33.9	24.0	52.0	60.4	2.50	B
*08BHF	12.7	8.51	7.75	6.55	4.50	16.4	17.6	11.8	11.1	12.1	0.56	B
*60HPF1	19.05	11.91	12.70	8.31	5.01	25.5	26.8	18.0	28.0	30.9	1.38	B

Xilin Chain No.	Pitch	Roller diameter	Width between inner plates	Pin diameter		Pin length		Inner plate depth	Ultimate tensile strength	Average tensile strength	Weight per meter	Type form
	P	d1 max	b1 min	d2 max	d3 max	L max	Lc max	h2 max	Q min	Q0	q	¡¡
	mm	mm	mm	mm	mm	mm	mm	mm	KN	KN	kg/m	¡¡
C2042HP	25.4	15.88	7.85	5.63	4.00	16.6	17.4	12.0	11.0	13.4	0.82	A
C2052HP	31.75	19.05	9.53	7.22	5.13	20.5	21.8	15.0	20.4	23.5	1.25	A
C2062HP	38.1	22.23	12.70	8.31	6.00	25.8	26.8	17.0	24.0	27.8	1.72	A
C2082HP	50.8	28.58	15.75	11.10	8.03	32.7	33.9	24.0	52.0	57.1	3.54	A
C2052HPF1	31.75	19.05	4.40	7.03	5.12	20.0	21.5	15.3	15.0	17.3	1.21	A
63HPF1	63.0	40.00	15.00	16.00	12.10	35.0	36.2	28.5	50.0	56.9	4.20	A
HP50	50.0	31.00	14.50	13.20	10.40	31.1	32.5	25.0	30.0	34.2	3.29	A
FK4202HP	50.8	31.80	15.00	14.00	10.10	36.3	39.0	26.0	42.0	51.5	3.75	A
FK4203HP	76.2	31.80	15.00	14.00	10.10	36.3	39.0	26.0	42.0	47.1	3.01	A
FK42035HP	88.9	31.80	15.00	14.00	10.10	36.3	39.0	26.0	42.0	51.3	2.79	A
FK4204HP	101.6	31.80	15.00	14.00	10.10	36.3	39.0	26.0	42.0	51.6	2.63	A
FK8403HP	76.2	47.60	19.00	19.05	13.60	43.8	46.3	39.0	84.3	97.8	6.81	A
FK8404HP	101.6	47.60	19.00	19.05	13.60	43.8	46.3	39.0	84.3	97.7	5.78	A
2062HPF	38.1	20.00	8.00	8.00	5.30	19.6	20.7	17.3	25.0	28.9	0.98	B
FK1650HP	50.8	30.00	10.50	11.40	8.20	27.4	28.6	26.0	50.0	53.7	2.56	B
HP63	63.0	30.00	10.50	11.40	8.10	26.7	28.1	26.5	50.0	53.8	2.07	B
FK16100HP	100.0	30.00	10.50	11.40	8.20	27.4	28.6	26.0	50.0	53.6	1.56	B
*C2040HP	25.4	7.95	7.85	5.63	4.00	16.6	17.4	12.0	11.0	12.4	0.46	C
*C2050HP	31.75	10.16	9.40	7.03	5.13	20.9	21.9	15.09	20.0	22.2	0.76	C
*C2060HP	38.1	11.91	12.70	8.31	6.00	25.8	26.8	17.0	24.0	28.6	1.02	C
*C2080HP	50.8	15.88	15.75	11.10	8.03	32.7	33.9	24.0	52.0	60.4	1.98	C

Xilin Chain No.	Pitch	Roller diameter	Width between inner plates	Pin diameter		Pin length		Inner plate depth	Ultimate tensile strength	Average tensile strength	Weight per meter	Type form
	P	d1 max	b1 min	d2 max	d3 max	L max	Lc max	h2 max	Q min	Q0	q	¡¡
	mm	mm	mm	mm	mm	mm	mm	mm	KN	KN	kg/m	¡¡
08BHPF2	12.7	8.51	13.2	6.65	5.20	18.0	19.2	11.8	10.0	11.8	0.50	A
10BHPF1	15.875	10.16	13.41	7.03	5.00	19.2	20.2	14.0	17.0	19.0	1.65	A
60HPF2	19.05	11.91	11.23	5.63	4.05	16.5	17.6	10.4	10.0	12.0	0.62	A
63HP	63.0	40.00	23.50	16.00	12.00	35.3	38.3	28.6	65.0	71.3	4.14	B
63HPF2	63.0	40.00	25.80	14.00	8.20	39.1	41.1	20.0	50.0	56.7	4.17	B
63HPF4	63.0	40.00	23.50	16.00	12.30	34.7	37.7	28.6	44.0	48.9	4.13	B
C2122HPF1	76.2	40.00	29.00	17.81	12.70	43.3	44.7	38.1	53.34	59.0	7.05	B

Lumber Conveyor Chains

ANSI Chain No.	Pitch	Roller diameter	Width between inner plates	Pin diameter	Pin length		Inner plate depth	Ultimate tensile strength	Average tensile strength	Weight per meter
	P	d1 max	b1 min	d2 max	L max	Lc max	h2 max	Q min	Q0	q
	mm	mm	mm	mm	mm	mm	mm	KN	KN	kg/m
81X	66.27	23.00	27.00	11.10	49.0	53.5	28.5	106.7	128.8	3.78
81XH	66.27	23.00	27.78	11.10	60.7	65.1	31.35	151.9	175.8	5.88
81XHH	66.27	23.00	27.78	11.10	65.6	7.00	31.35	191.1	212.6	6.70
81XHS	66.27	23.00	27.00	11.10	63.6	68.0	31.8	152.0	177.2	6.55
3939	203.2	23.00	27.00	11.10	49.0	53.5	28.58	115.58	136.7	2.45

Heavy-Duty Cranked-Link Transmission Chains

Xilin Chain No.	Pitch	Roller diameter	Width between inner plates	Pin diameter	Pin length	Plate depth	Plate thickness	Measuring Force	Ultimate tensile strength	Weight per meter
	P	d1 max	b1 min	d2 max	L max	h2 max	T max	¡¡	Q min	q
	mm	mm	mm	mm	mm	mm	mm	N	KN	kg/m
2010	63.5	31.75	38.1	15.90	90.7	47.8	7.9	900	250.0	14.00
2512	77.9	41.28	39.6	19.08	100.0	60.5	9.7	1300	340.0	18.40
2814	88.9	44.45	38.1	22.25	117.6	60.5	12.7	1800	470.0	25.10
3315	103.45	45.24	49.3	23.85	134.9	63.5	14.2	2200	550.0	27.30
3618	114.3	57.15	52.3	27.97	141.2	79.2	14.2	2700	760.0	38.20
4020	127.0	63.50	69.9	31.78	168.1	91.9	15.7	3600	990.0	52.10

» back